700W Digital Interface 1/4 Brick
ADQ700 series quarter-brick isolated DC-DC converters produce a single fully regulated 12 V output. Rated at 700 watts, these converters can deliver up to 58 amps output current and have no minimum load requirement. They have an input voltage range of 40 to 60 V and are primarily designed for use with standard 48 V supplies in computing and server applications, as well as regulated 48V supplies in communications equipment.
ADQ700 series converters have both a digital interface version and an analogue interface version that both follow the industry standard DOSA footprint. The digital interface version allows communication to the converter via a PMBus command protocol with control and monitoring functions for voltage, current, temperature and the setting and reporting of fault conditions. Standard analogue control features include output voltage trim and remote on/off functions.
ADQ700 series converters have an ultra high efficiency of typically 96% at full load and can operate over an ambient temperature range of -40 to +85˚C, making them an ideal choice for the isolated converter in a distributed power architecture supplying power to non-isolated converters. Their open-frame design is optimized for forced air or conduction cooling and an aluminium baseplate option is available for enhanced thermal performance. The conversion technology employs 200 kHz fixed frequency switching to help minimize external EMI filtering requirements.
Standard features protection features are input undervoltage, overvoltage lockout, output overvoltage, output overcurrent and overtemperature conditions. ADQ700 series converters have an enhanced pre-bias start-up capability and for high current applications two converters can be connected in parallel, automatically using the droop method of current sharing.
ADQ700 series converters are low profile units that are ideal for systems with demanding inter-board spacing requirements; the open-frame models have an installed height of 0.43 inch (11 mm), while the baseplate versions require 0.52 inch (13.3 mm).
Universal PMBus GUI Software Package
ADQ700 Data Sheet
Total Max Power:
Total Max Current:
40 V to 60 V
12 V to 12 V
Size (L x W x H):
2.300" x 1.450" x 0.500"
-40 to +85°C
- Input Voltage:: 40V to 60V
- Total Max Power:: 700 W
- Total Max Current:: 58 A
- Output Voltage:: 12 V
- Outputs:: SINGLE
- Size (L x W x H):: 2.300
- Warranty:: 2 years
- Operating Temperature:: -40 to +85 ˚C
- 700 W continuous power
- Ultra high efficiency > 96%
- 40 - 60 Vdc Datacomm input range
- Baseplate optimized for contact cooling or heatsink mounting
- Open frame version optimized for air cooling
- Low ripple and noise
- Fixed switching frequency
- High capacitive load capability
- Pre-bias start-up capability
- High reliability
- RoHS 6 compliant
- UL94 V-0 materials
- Heatsink accesory pack can be ordered (heatsink, thermal pad and screws)
- DOSA footprint compliant
- PMBus® communication
- IPC9592 component stress compliant
- Two year warranty (consult factory for extended terms)