AVQ100 wide-range Series

100W 4:1 I/P 3v3 1/4 brick

The AVQ100-36S3V3 is a single output DC/DC converter with standard quarterbrick outline and pin configuration. It delivers up to 25A output current with 3.3V output voltage.

Above 90% ultra-high efficiency and excellent thermal
performance makes it an ideal choice to used in telecom and datacom applications and can operate under an ambient temperature range of -40degC ~ +85 degC.

AVQ100 wide-range Datasheet(s)

Datasheet Technical Documentation Print this page
  • Total Max Power:
    82.5 W
  • Total Max Current:
    25 A
  • Input Voltage:
    18 V to 60 V
  • Output Voltage:
    2.6 V to 3.6 V
  • Outputs:
    Single
  • Size (L x W x H):
    2.300" x 1.450" x 0.500"
  • Warranty:
    2 years
  • Operating Temperature:
    -40 to +85 degC

Electrical Specifications

  • Input
  • Output
  • Logic Control
  • Isolation
  • Other
  • Input voltage: 18Vdc to 60Vdc
  • Output voltage: 3v3
  • Output current: 25A
  • Enable: Positive or Negative
  • Isolation voltage: 1500Vdc
  • Insulation: Basic insulation
  • Mechanical outline: standard 1/4 brick footprint
  • Mechanical: Open frame or baseplate version
  • Delivering up to 25A output
  • Ultra-high efficiency: 90% (typ., full
  • load,48V).92% (typ.,hald load,24V)
  • Wide input range: 18V ~ 60V
  • Excellent thermal performance
  • No minimum load requirement
  • Start-up and shut-down monotonically into any normal and
  • pre-biased loads, internal pre-bias function circuit prevents back
  • negative current drawn from external load
  • RoHS6/6 compliant
  • Remote control function
  • Remote output sense
  • Trim function:80%~110%
  • Input under voltage lockout
  • Output over current protection
  • Output over voltage protection
  • Over temperature protection
  • Industry standard quarter-brick pinout outline
  • Open frame or baseplate optional
  • Pin length optional
  • Safety
  • IEC/EN/UL/ 60950-1
  • CSA-C22.2
  • CE Mark
  • UL/TUV
  • GB4943
  • EN55022 Class A

Let us help with your product selection

New Search by Requirements