MP1 Series

1000–1200 Watt Configurable AC-DC Power Supplies

The MP1 series is an AC input to DC output configurable power supply system that offers seven slots for single, dual or triple output modules ranging from 2 V to 60 V. Outputs can be connected in parallel or series to obtain thousands of output combinations. Capable of delivering up to 1,200 watts and with up to 21 isolated outputs, the MP1 series is an extremely flexible and versatile multi-output power solution. Standard features include remote sense on all outputs rated at 2 amps and above, current sharing on all outputs rated at 10 amps or greater and remote voltage adjustment on all outputs. Numerous options include a VME timing and system DC OK module, and a low leakage version for medical applications.

Datasheet Press Releases Technical Documentation Print this page
  • Total Max Power:
    1,200 W
  • Total Max Current:
    240 A
  • Input Voltage:
    85 V to 264 V
  • Output Voltage:
  • Outputs:
  • Size (L x W x H):
    11.000" x 8.000" x 2.500"
  • Warranty:
    2 years
  • Operating Temperature:
    -20°C to +70°C

Electrical Specifications

  • Input
  • Output
  • Logic Control
  • Isolation
  • Input Range: 85-264 VAC; 120-350 VDC
  • Internal Fuse: 20A
  • Hold-up: 20mSec
  • Leakage Current: 2.0mA
  • Turn-on Time: AC 1.5 sec; Inhibit 150mS
  • Power Factor: 0.99 typ @ full case load
  • Efficiency: 80% typical depending on Configuration
  • Inrush Current: 40A Peak (Soft Start)
  • Frequency: 47-440 Hz
  • Ripple: 0.1% RMS; 1.0% P-P @ 20MHz limit
  • Overall Regulation: 0.4% or 20mV max
  • Margining: +/- 4-6% of nominal
  • Adjust Range: +/-10% minimum on all outputs
  • User Interface: ACOK; DCOK; Inhibit; V-Program; Sense
  • Safety: Per EN60950
  • 5.0V/3.3V dual outputs
  • Enable (on/off)
  • Output loadsharing
  • Industry standard pin-out
  • Trim feature, both rails
  • 100°C Baseplate temperature
  • Unencapsulated 2.3" x 2.4" x 0.50" pkg.
  • 48VDC Input
  • Thermal protection

Let us help with your product selection

New Search by Requirements

Sales Support
☒ Close