ERM50 Low input range Series

50 Watt DC-DC Converters (Low Input Models)

The ERM50 series high performance 50 watt isolated DC-DC converter modules are designed specifically for railway applications. The low input versions feature a 43 to 101 Vdc input that complies with the European EN50155 standard for electronic equipment used on railway rolling stock. There is a choice of four single output models, offering voltages of 5 V, 12 V, 15 V or 24 V.

Fully encapsulated in a metal case with an isolated baseplate, the converters have an industry-standard 2.28 x 1.45 inch (57.9 x 36.8mm) quarter-brick footprint and a height of just 0.5 inch (12.7 mm). Reinforced insulation rated at 3000 Vac rms and high EMI immunity qualifies these converters for many demanding applications in railway and other transportation systems.

Advanced circuit topology provides up to 92% efficiency and allows the converters to accommodate ambient operating temperatures as high as 85˚C with suitable derating. An optional heatsink is available. Further features include differential remote sense, remote On/Off and undervoltage shutdown, as well as overload and short-circuit protection.

Datasheet Press Releases Technical Documentation Print this page
  • Total Max Power:
    50 W
  • Total Max Current:
    10 A
  • Input Voltage:
    43 V to 101 V
  • Output Voltage:
    5 V to 24 V
  • Outputs:
    Single
  • Size (L x W x H):
    2.280" x 1.450" x 0.500"
  • Warranty:
    3 years
  • Operating Temperature:
    -40 °C to +85°C

Electrical Specifications

  • Input
  • Output
  • Isolation
  • Other
  • Input range: 43 - 101 Vdc;
  • Efficiency: 92% @ 12 Vo
  • isolation voltage: 3000Vac
  • Voltage tolerance: ±1.0%
  • Noise/ripple: 24V model: 150mV, other models: 100mV
  • Overload protection: 150% typ of Io max, hiccup
  • Insulation resistance:: 1000Mohm
  • Insulation capacitance:: 3000pF
  • Switching frequency: 320 KHz
  • Mechanical : baseplate 1/4 brick encapsulated
  • 5.0V/3.3V dual outputs
  • Enable (on/off)
  • Output loadsharing
  • Industry standard pin-out
  • Trim feature, both rails
  • 100°C Baseplate temperature
  • Unencapsulated 2.3" x 2.4" x 0.50" pkg.
  • 48VDC Input
  • Thermal protection

Let us help with your product selection

New Search by Requirements

Sales Support
☒ Close