DP40-M Medical Series 40 Watt AC-DC Power Adapters (Medically Approved)

Request a Sample / Buy Now
DP40-M Medical
 

The DP40-M series of freestanding external 40 watt AC-DC power adapters carries both medical and safety approvals. These adapters provide a very flexible, pre-approved power solution for a wide variety of portable and desktop applications, including medical, instrumentation, telecommunications, computer peripheral and test and measurement systems. The adapters are available in both Class I and Class II configurations with a 2-pin or 3-pin AC input connector.

There is a choice of 12 models, covering output voltages from 9 to 48 Vdc and output currents up to 4.44 amps. All these adapters accept a wide 90—264 Vac input and can also operate from a 127—300 Vdc supply. They meet Energy Star Efficiency Level V criteria and have a no-load power consumption of less than 300 mW.

DP40-M Medical Datasheet(s)

Datasheet Technical Documentation Product Training Module Print this page

Let us help with your product selection

  • Total Max Power: 40 W
  • Total Max Current: 4.4 A
  • Input Voltage: 90 V to 264 V
  • Output Voltage: 9 V to 48 V
  • Outputs: Single
  • Size (L x W x H): 4.880" x 2.400" x 1.550"
  • Warranty: 2 years
  • Operating Temperature: 0 to +40°C

Electrical Specifications

  • Input current: 0.5 A Maximum
  • Safety ground leakage current: 300 µA/100 µA maximum@ 50/60 Hz, 264 VAC input
  • Frequency: 47 - 63 Hz
  • Inrush current: 50 A maximum @ 230 VAC, cold start 25°C
  • Efficiency: 84% typical
  • EMI/RFI: FCC Part 15, Class B & EN55022 (CISPR 22) Class B
  • Input range: 90 - 264 Vac (wide range)
  • Maximum Power (Po): 40 W
  • Overvoltage protection: 20% - 45% above output voltage, latching type
  • Short circuit protection: Auto recovery
  • Overload protection: 110% -160% above peak rating
  • Medical and ITE safeties
  • Universal AC input
  • Fully regulated output
  • EN61000-3-2 compliant
  • Input power <49 watts
  • Overcurrent and overvoltage protection
  • High efficiency
  • High MTBF
  • IEC320 AC input receptacle
  • 3 pin (type C14) and
  • 2 pin (type C8)
  • Built in EMI filter
  • (CISPR 22 Class B)
  • Meets Energy Star 2.0 and CEC
  • CE Mark EMC & LVD