LPS150 Series

  • Total Max Power:
    175 W
  • Total Max Current:
    22 A
  • Input Voltage:
    85 V to 264 V
  • Output Voltage:
    4.5 V to 48 V
  • Outputs:
    Single
  • Size (L x W x H):
    4.250" x 8.500" x 1.500"
  • Warranty:
    2 years
  • Operating Temperature:
    0 to +70°C

Electrical Specifications

  • Input
  • Output
  • Logic Control
  • Input range: 85-132 VAC or 170-264 VAC automatically selected. 220-300 VDC
  • Frequency: 47-63 Hz
  • EMI filter: FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted
  • Inrush current: 38 A max, cold start @ 25°C
  • Safety ground leakage current: <0.5 mA @ 50/60 Hz, 264 VAC input
  • Efficiency: 75% typical at full load
  • Overvoltage protection: 5 V output: 5.7 to 6.7 VDC. Other outputs 10% to 25% above nominal output
  • Overload protection: Short circuit protection. Case overload protected @ 110% to 145% above peak rating
  • Hold-up time: 20 ms @ 110 W load, 115/230 VAC
  • Adjustment range: ±5% minimum
  • Maximum power: 110 W convection (75 W with cover) 150 W with 30 CFM forced air (130 W with cover)
  • Power Failure: TTL Logic signal goes high 50-150 msec after 5 V output. It goes low at least 3 ms before loss of regulation.
  • Remote inhibit: Requires an external TTL high signal to inhibit outputs.
  • Remote sense: Compensates for 0.5 V lead drop minimum, will operate without remote sense connected. Reverse connection protected.
  • Remote sense
  • Single wire current sharing
  • 135 khz switching frequency
  • Auto ranging input
  • Power fail
  • Built-in EMI filter
  • Low output ripple
  • Adjustable output
  • Overload protection
  • Optional cover (-C suffix).
  • Remote inhibit
  • Overvoltage protection

Let us help with your product selection

New Search by Requirements

Corporate website design by Freshleaf Media