LPS120 Series

LPS120
 

The LPS120 AC-DC power supply series delivers 130 watts with single outputs from 3.3 V to 48 V. Featuring active power factor correction to minimize input harmonic distortion, the LPS120 Series compact 85-264 VAC power supplies are ideal for 1U (1.75-inch) rack installations and other low-profile applications. All models also offer a 12V 1/2A auxiliary output and 5V at 1/2A standby output, as well as overload, over-voltage and thermal protection.

LPS120 Datasheet(s)

Datasheet Technical Documentation Print this page

Let us help with your product selection

  • Total Max Power: 130 W
  • Total Max Current: 36 A
  • Input Voltage: 85 V to 264 V
  • Output Voltage: 3.3 V to 48 V
  • Outputs: Single
  • Size (L x W x H): 5.000" x 3.000" x 1.290"
  • Warranty: 2 years
  • Operating Temperature: -20°C to +70°C

Electrical Specifications

  • Input range: 85 - 264 VAC, 120 - 300 VDC
  • Power factor: 0.99 typical
  • EMI filter: FCC Class B conducted, CISPR 22 Class B conducted, EN55022 Class B conducted, VDE 0878 PT3 Class B conducted
  • Efficiency: 80% typical at full load
  • Safety ground leakage current: 0.5 mA @ 50/60 Hz, 264 VAC input
  • Frequency: 47 - 440 Hz
  • Inrush current: 40 A max., cold start @ 25°C
  • Maximum power: 80 W for convection;
  • Fan output: 12 V @ 500 mA -5%, +7%
  • Adjustment range: ± 5% minimum on the main outputs
  • Standby outputs: 5 V @ 500 mA ± 5%
  • Overvoltage protection: 20% to 35% above nominal output
  • Overload protection: Short circuit protection on all outputs. Case overload protected @ 120-135% above peak rating
  • Hold-up time: 20 ms @ 125 W load, 120 VAC input
  • Power failure: TTL logic signal goes high 100-500 msec after main output; it goes low at least 4 msec before loss of regulation
  • Remote inhibit: Requires a contact closure to disable the outputs, except 5V standby.
  • Remote sense: Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected.
  • Active power factor correction
  • 5 V Standby output and 12V Fan output
  • Overload protection
  • Built-in Class B EMI filter
  • Single wire current sharing
  • Remote sense
  • EN61000-3-2 compliant
  • Adjustable main output
  • Power fail and remote inhibit
  • Thermal overload protection
  • Overvoltage protection