HPS35 Series

Let us help with your product selection

  • Total Max Power: 350 W
  • Total Max Current: 29.2 A
  • Input Voltage: 90 V to 264 V
  • Output Voltage: 11.4 V to 50.4 V
  • Outputs: Single
  • Size (L x W x H): 11.500" x 4.240" x 1.590"
  • Warranty: 2 years
  • Operating Temperature: 0 to +50°C derates to +70°C

Electrical Specifications

  • Input voltage: 90 - 264 VAC typical
  • Turn-on time: AC ON 2 sec., Inhibit/Enable 160ms
  • Harmonic distortion: Meets EN61000-3-2
  • AC OK: 5 ms early warning minimum before outputs lose regulation
  • Leakage current standard: <0.5 mA max @ 230 VAC @ 60 Hz (per module)
  • Holdup time: 20 ms minimum (independent of input VAC)
  • Efficiency: 80% typ @ full load, 230 VAC
  • Radiated EMI: CISPR 22 EN55022 Level
  • Power factor: 0.98 typical @ 115 VAC, full load
  • Frequency: 47 - 440 Hz
  • Inrush current: 40 A peak typical @ 25 °C
  • Isolation: Meets EN60950
  • EMI filter standard: CISPR 22 EN55022 Level
  • Short circuit protection: Protected for continuous short circuit. Auto recovery.
  • Ripple: 1% of Vout Pk - Pk (20 MHz bandwidth)
  • Remote sense: Up to 0.5 V total drop
  • Overall reg: ± 2%
  • Reverse voltage protection: 100% of rated output current
  • Global Inhibit: Logic '0'
  • Adjustability: ± 5% of nominal output voltage
  • Thermal protection: Main and Aux disabled when internal temp exceeds safe operating range.
  • Overvoltage protection: 120 - 140% . AC Reset.
  • Single wire parallel: Current share to within 10% of total rated current on main output
  • Minimum load: Not required
  • Overcurrent protection: 115% - 130% of rated output current
  • Dynamic response: 4% with 50% load step
  • Standby voltage: 5 VDC @ 2 A max. whenever AC input is applied
  • Recovery time: To within 1% in < 300 µsec
  • Active Power Factor Correction
  • EN61000-3-2 compliant
  • CISPR22, EN55022 Level-B conducted/radiated EMI
  • EN61000 immunity standards
  • 5 Vsb @ 2 A
  • Overvoltage protection (OVP)
  • Overcurrent protection (OCP)
  • Overtemperature protection (OTP)
  • AC OK signal and indicator LED
  • DC OK signal and indicator LED
  • Remote Inhibit
  • Remote Sense on main output
  • Hot Plug
  • N+1 Redundant
  • No minimum load