HPS15 Series 1600 Watt Front End AC-DC Power Supplies

Request a Sample / Buy Now

The DS1600SPE series bulk front end AC-DC power supply accepts a wide range 90–264 Vac input and provides a main 12 V output plus a 12 V standby output. Rated at 1,600 watts, it is an 80 Plus Platinum power supply with a peak conversion efficiency of 94%. Housed in a 1U high rack-mounting enclosure with a short form factor that frees up system space, the DS1600SPE has a high power density of 40 watts per cubic inch. This series comes in two airflow versions – dc-connector to ac-connector and vice versa.

The main 12 V output can deliver up to 133.3 amps and stays within regulation down to zero load, making it perfect for feeding downstream DC-DC converters in systems that use distributed power architectures (DPA). Active current sharing enables multiple supplies to be paralleled for very high current applications without need of additional components. The DS1600SPE power supply is hot pluggable and ideal for fault tolerant, N+1 and N+N redundant applications.

This digitally-controlled power supply is PMBus™ compliant. A built-in I2C serial interface allows set-up, monitoring and control to be performed using Artesyn Embedded Technologies' universal PMBus graphical user interface.

Universal PMBus GUI Software Package

HPS15 Datasheet(s)

Datasheet Technical Documentation Print this page

Let us help with your product selection

  • Total Max Power: 1,500 W
  • Total Max Current: 250 A
  • Input Voltage: 90 V to 264 V
  • Output Voltage: 22.8 V to 66 V
  • Outputs: Single
  • Size (L x W x H): 5.040" x 3.830" x 12.500"
  • Warranty: 2 years
  • Operating Temperature: -10°C to +50°C

Electrical Specifications

  • Input voltage: 85 - 264 VAC
  • Leakage current standard: 2 mA max @ 264 VAC @ 60 Hz (per module)
  • Efficiency: 85% typ @ full case load 230 VAC
  • Power factor: 0.99 typical meets EN61000-3-2
  • Frequency: 47 - 440 Hz
  • Inrush current: 40 A peak max.
  • Overall reg: 1%
  • Remote sense: Up to 0.5 V total drop
  • Ripple: 1% of Vout Pk-Pk limited to 20 MHz
  • Adjustability: ± 5% of nominal
  • Standby voltage: 5 VDC @ 5 A max. whenever AC input is applied
  • Dynamic response: 2% with 25% load step
  • Overcurrent protection: 105-120% of rated output current
  • Overvoltage protection: 105 - 120%
  • Integrated OR-ing diode
  • Remote Sense on Bulk output
  • Overload protection on all outputs
  • Active Inrush limiting
  • PFC to 0.99 typical EN61000-3-2
  • CISPR22, EN55022 Curve B conducted/radiated EMI
  • EN61000 immunity standards
  • Optional 48 W fan voltage (12 V or 24 V)
  • Standard 5 V at 5 A standby voltage (3.3 V option)
  • No minimum load
  • Overvoltage protection
  • Input OK signal and indicator LED
  • Inhibit/Enable
  • Remote Margin/Voltage Programming
  • Optional current monitor
  • Optional AC Line discrimination
  • Output Good signal and indicator LED
  • Temp good signal and indicator LED
  • Optional single wire digital temp monitor
  • Optional module I2C interface
  • Optional Rack µController
  • Hot Plug
  • N+1 Redundant Standard
  • Optional fan fail signal
  • Module present signal
  • Optional short circuit latch