DPS50-M Medical Series 50 Watt AC-DC Power Adapters (Medically Approved)

Request a Sample / Buy Now
DPS50-M Medical
 

The DPS50-M series of freestanding external 50 watt AC-DC power adapters features full (non-patient critical) medical safety approvals. These adapters provide a very flexible power solution for a wide variety of low power medical, dental and laboratory applications such as dialysis machines, monitoring equipment and infusion pump controls.

There is a choice of five models, covering output voltages from 5 to 48 Vdc and output currents up to 6 amps, and the adapters incorporate remote sense to the output plug to ensure voltage accuracy. All DPS50-M series adapters accept a wide 90—264 Vac input and can also operate from a 127-300 Vdc supply. They have a typical average efficiency of 86% and (with the exception of the 5 V model) all meet Energy Star Efficiency Level IV criteria.

DPS50-M Medical Datasheet(s)

Datasheet Technical Documentation Print this page

Let us help with your product selection

  • Total Max Power: 60 W
  • Total Max Current: 6 A
  • Input Voltage: 90 V to 264 V
  • Output Voltage: 5 V to 48 V
  • Outputs: Single
  • Size (L x W x H): 5.240" x 2.390" x 1.620"
  • Warranty: 2 years
  • Operating Temperature: 0 to +40°C

Electrical Specifications

  • Input current: < 2.0 A rms @ 115 VAC; < 1 A @ 230 VAC
  • EMI/RFI: FCC Part 15, Subpart B Class B & EN55022 (CISPR 22
  • Inrush current: < 50 A @ 230 VAC, cold start @ 25°C
  • leakage current: < 0.5 mA @ 50/60 Hz, 264 VAC input
  • Frequency: 47 - 440 Hz
  • Efficiency: > 80% @ full load typical, @115 VAC
  • Input range: 90 - 264 VAC (wide range), 127 - 300 VDC
  • Maximum Power: 60 W (DPS5-M, 30 W)
  • Hold-up time: 10 ms. typical at full load @ 115 VAC
  • Overvoltage protection: 20% - 45% above nominal output maximum.
  • Barrel type: DC plug center +v, DC plug outer -v
  • Overload protection: Output short circuit protection auto recover.
  • Cable/connector: DC cable with 2.5 mm center plug
  • Medical safety approvals
  • Overload and short circuit protection
  • Complies with EN61000-3-2
  • Input power < 74 watts
  • LED power good indicator
  • Built in EMI filter (CISPR 22 Class B)
  • IEC320 AC receptacle, 3 pin (type C14)
  • High MTBF
  • Universal AC input
  • Constant voltage
  • CE Mark EMC & LVD (except for DPS52-M)
  • Blue Angel compliance
  • High efficiency
  • Fully regulated output