.svg){kind=logo}
artesyn™
LPS100-M
Active
80 to 150 W AC-DC Medical Power Supplies
The LPS100-M series of open-frame AC-DC power supplies features ITE and medical safety approvals. The series offers a choice of six single output models, with voltages of 5 V, 12 V, 15 V, 48 V or 54 VDC. Each model also provides an isolated 12 V fan output. The main output of the 54 V model features POE (Power over Ethernet) isolation. LPS100-M series power supplies have a typical full load power conversion efficiency of 88% and with a height of only 1.29 inches offer a power density in excess of 14 W per cubic inch. The series is primarily designed for use in information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications.
Features
- Frequency 47 - 63 Hz
- Input range 90 - 264 VAC, 120 - 300 VDC
- Inrush current 50 A max., cold start @ 25°C
- Power factor 0.99 typical
- Safety ground leakage current 275 uA @ 50/60 Hz, 264 VAC input
- Fan Output 12 V @ 1 A isolated, +/-5%
- Efficiency 88% typical at full load
- Adjustment range ±10% minimum on the main output
- Hold-up time 10 ms @ 125 W load, 120 VAC input
- Remote Sense Compensates for 0.5 V lead drop
Benefits
- Power fail Open collector logic signal
- Overload protection Short circuit and case overload protected
Specifications
| Output Power (W): | 150 |
|---|---|
| Length (Inches): | 4 |
| Width (Inches): | 2 |
| Height (Inches): | 1.29 |
| Mounting Type: | Embedded PSU |
| Minimum Output Current (A): | 0 |
| Maximum Output Current (A): | 24 |
| Output Voltage Range (V): | 4.5V to 59.4V |
Technical Documentation
24/5 Support Available
Get Expert Advice From Our Engineers
We are committed to providing excellent customer service and technical support to our customers. With live chat and phone support, you can reach out to a qualified engineer for help at any time.
Get Support Now