
Intelligent Transfer Switch
Intelligent Transfer Switch
Up to 24000 Watts
Advanced Energy's Artesyn Intelligent Transfer Switch (iTS™) is designed for any application needing power switched to different loads during a 24 hour period (i.e. Horticulture, Burn-in, Test and Measurement, etc.). Advanced Energy’s Intelligent Transfer Switch has a built-in PSU to supply power to the relays and MCU module. It is designed to operate with 2 phases of a 3-PH input mains up to 480VAC nominal, or standard Phase and Neutral of single-phase mains.
Datasheet Press Releases Technical Documentation Print This Page- Specifications
- Special Features
- Models - Stock check
-
Total Max Power:
24,000 W -
Total Max Current:
200 A -
Input Voltage:
125 V to 250 V -
Output Voltage:
N/A -
Outputs:
-
Size (L x W x H):
12.600" x 17.600" x 3.150" -
Warranty:
5 years -
Operating Temperature:
0°C to +50°C at 100% rate
Electrical Specifications
- Input
- Output
- Logic Control
- Isolation
- Other
- Input Voltage - Control: 186-480 Vac Nominal; 1 or 2 phase
- Input Voltage - Relay Module: 250V nominal contact rating per module
- Input Current - Relay Module: 25A max contact rating per module
- Input Frequency - Control: 50/60 Hz Nominal
- # of Relay Modules : Up to 8
- Relay Coil from Control: 12Vdc @ 1A for up to 8 relay modules (96W max)
- PRESENT (OUTPUT): Low asserted if relay module present
- Drive_A (INPUT): High asserted to drive relay to A position
- Drive_B (INPUT): High asserted to drive relay to B position
- FAULT_1 (OUTPUT): Low asserted to trigger fault if coil voltage >5V
- FAULT_2 (OUTPUT): Low asserted to trigger if outputs A and B active
- SGND (OUTPUT): Digital ground reference for MCU
- EMC/IMMUNITY: EN61000-4-X (see datasheet)
- Primary-to-EARTH: 2500Vdc
- Primary-to-Secondary: 2500Vdc
- Secondary-to-Earth: 2500Vdc
- 19: changeable from front to back
- 5 years manufacturer’s warranty
- Modular 8 channel A:B switch
- Standard 19” rack
- Reversable mounting tabs
- Designed for use with iHP and LCM4000 product families
- 100% digital control
- Intelligent zero current switching when used with Artesyn devices
- Digital communication via RS485 (Modbus-RTU)
- Cloud based User configurable GUI
- Natural convection cooled (No Fan)
- Field upgradeable firmware
- Up to 16 racks are addressable from one control node
- Configurable baud rate
- MTBF 400K hours per Telecordia SR-332 Method 1 Case 4, Part Stress