IBC04 Series

50 watt Eight-Brick Isolated DC-DC Converters

The IBC04 series eighth-brick isolated DC-DC converter is designed specifically to provide a regulated low noise 12 Vdc output for feeding downstream non-isolated point-of-load (POL) converters in systems with distributed power architectures (DPA). The converter has an ultra wide 18 to 60 Vdc input range that accommodates standard 24 and 48 Vdc telecommunications equipment supplies. Rated at 50 watts, it can deliver up to 4 amps and accommodates an ambient operating temperature range of -40 to 85˚C.

The converter has a typical efficiency of 92% and is based on an open-frame design that is optimized for forced air or conduction cooling. The conversion technology employs 300 kHz fixed frequency switching to help minimize external EMI filtering requirements.

Standard features include undervoltage lockout and remote enable, with non-latching overcurrent, overtemperature and overvoltage protection. IBC04 series converters have an installed height of just 0.34 inch (8.7 mm), making them ideal for systems with demanding inter-board spacing requirements.

Datasheet Technical Documentation Print This Page
  • Total Max Power:
    50 W
  • Total Max Current:
    4 A
  • Input Voltage:
    18 V to 60 V
  • Output Voltage:
    12 V to 12 V
  • Outputs:
  • Size (L x W x H):
    2.300" x 0.900" x 0.340"
  • Warranty:
    2 years
  • Operating Temperature:
    -40°C to +85°C

Electrical Specifications

  • Input
  • Output
  • Logic Control
  • Isolation
  • Input voltage: 18 - 60Vdc
  • Output current: 4A
  • Output Power: 50W
  • Output voltage: 12V
  • Enable: Negative enable
  • Isolation: 1500Vdc
  • Insulation: Basic Insulation
  • Special featureS
  • - Ultra wide input range
  • - Optimised for contact cooling
  • - Low ripple and noise
  • - Fixed switching frequency
  • - High capacitive load capability
  • - Pre-bias start-up capability
  • - Basic insulation system
  • - Through hole termination
  • - Open frame construction
  • Safety
  • - UL 60950-1
  • - CE Mark

Let us help with your product selection

New Search by Requirements

Sales Support

Data protection – The information you provide on this form will be held on file by Artesyn on a database and will be used for the purposes of promotion of Artesyn products, services and other stories. By submitting this form, you consent to the use of your personal data for these purposes.

We use a tool called Mailchimp to manage our subscriber lists, so when you apply to join, you will receive an email from Mailchimp to confirm that you wish to join the Artesyn mailing list (the email will be from an address such as Artesyn Embedded Power <info@mail1.mcsignup.com>). Please click on the link in the email – this is to help us protect your privacy. You can unsubscribe at any time.

☒ Close