LCC600 Series

600 Watt Conduction Cooled AC-DC Power Supplies

The LCC600 series of fully enclosed conduction cooled AC-DC power supplies comprises four models, offering main output voltages of 12 V, 28 V, 36 V or 48 V. Each model also provides a 5 Vdc standby output that can supply up to 1.5 amps. Rated at 600 watts, these power supplies incorporate a thermal baseplate and are capable of delivering full output power over a wide operating temperature range of -40 to 85˚C. For maximum applications flexibility, the main output is adjustable. The 48 V model, for example, can be adjusted from 44 to 54 V and has a maximum current rating of 12.5 amps.

These power supplies feature a universal 90–264 Vac input and are optionally available with a 180–305 Vac input for use in three-phase mains input applications with a 277 Vac Line-to-Neutral configuration.

LCC600 series power supplies are especially suitable for use in harsh environments. Housed in a robust metal case, they are available with standard input/output connectors or in fully sealed versions with integral cables that carry an IP65 rating against water or dust ingress. Their fanless operation also makes these power supplies ideal for environments where acoustic noise or dust disturbance would be an issue, such as in offices or medical facilities. Typical applications include telecommunications antenna and base station equipment, control consoles and outdoor/indoor signage – a constant current mode is provided for LED lighting/Horticultural Lighting. Versions with medical safety approvals are available for BF type applications such as patient monitoring systems and ultrasound equipment.

Standard features include AC OK and DC OK signals, remote inhibit and differential remote sense on the main output. The power supplies are comprehensively protected against overtemperature and output overcurrent conditions, with latching overvoltage protection of both the main and standby outputs. LCC600 series power supplies support active current sharing – up to five units can be connected in parallel for high current applications.

LCC600 series power supplies have a compact 4 x 9 inch (101 x 228 mm) footprint and a height of just 1.57 inches (40 mm).

All LCC600 series power supplies feature a PMBus™-compliant I2C communication interface to facilitate remote set-up and monitoring. A built-in EEPROM is provided for storing manufacturing and customer data.

Universal PMBus GUI Software Package

Datasheet Brochures Press Releases Technical Documentation Print This Page
  • Total Max Power:
    600 W
  • Total Max Current:
    50 A
  • Input Voltage:
    90 V to 305 V
  • Output Voltage:
    12 V to 54 V
  • Outputs:
    Single
  • Size (L x W x H):
    9.000" x 4.000" x 1.570"
  • Warranty:
    2 years
  • Operating Temperature:
    -40°C to +85°C Baseplate

Electrical Specifications

  • Input
  • Output
  • Isolation
  • U Suffix: 90-264 VAC
  • H Suffix: 180-305 VAC
  • Frequency: 47-63 Hz, 440 Hz
  • Efficiency: Up to 93.5% at Full Load
  • Max Output Power: 600 W max up to 85 °C baseplate
  • 5V Standby: 1.5 A max
  • U Suffix: PRI-SEC: 4,000 VAC (2X MOPP)
  • U Suffix: PRI-EARTH: 1,500 VAC (1X MOPP)
  • U Suffix: SEC-EARTH: 1,500 VAC (1X MOPP)
  • 600 W Single Output with 5 VDC Standby
  • Conduction Cooled / No Fan
  • -40 to 85 °C Baseplate Temp (No Derating)
  • Industrial / Medical Safety Approvals
  • Suited for BF Type medical applications
  • MIL-STD-461F EMI Compliance
  • Optional 180-305 VAC Input
  • Optional IP65 Enclosure
  • Active Current Share
  • Active PFC
  • AC_OK; DC_OK Signals
  • I2C / PMBus

Let us help with your product selection

New Search by Requirements

Sales Support
☒ Close