SIL60C2 Series

240 Watt (60 Amp) Non-Isolated DC-DC Converters

The SIL60C2 series 60 amp non-isolated DC-DC converter is designed for cost- and space-sensitive applications. It is available in a through-hole vertically mounting configuration with dual rows of pins. The converter accepts a wide range 4.5 to 13.8 Vdc input and provides an output that is adjustable from 0.8 to 4.0 Vdc to accommodate a wide variety of silicon power needs. Rated at 240 watts, the SIL60C2 is capable of delivering up to 60 amps; it has a typical efficiency of 89% and no minimum load requirement. Standard features include differential remote sense, remote On/Off and remote ‘power good’ indication. This converter also supports phase shedding to save power under light load conditions, and its output voltage can be adjusted to within 1% by a 2-bit VID signal.

Datasheet Technical Documentation Print This Page
  • Total Max Power:
    240 W
  • Total Max Current:
    60 A
  • Input Voltage:
    4.5 V to 13.8 V
  • Output Voltage:
    0.8 V to 4 V
  • Outputs:
  • Size (L x W x H):
    1.980" x 0.780" x 0.540"
  • Warranty:
    2 years
  • Operating Temperature:
    0 to +70°C

Electrical Specifications

  • Input
  • Output
  • Input range: 4.5 -13.8 V
  • Output current: 60 A
  • Output voltage: 0.8 - 4.0 V
  • Ripple and noise: < 40 mV typical
  • 2 bit VID adjustable output voltage
  • Phase shedding for power saving during light loads
  • High power density design means reduced board space requirement
  • Power good output signal
  • Operating ambient temp up to +70°C with suitable derating and forced air cooling
  • Remote ON/OFF (active high)
  • 0 A minimum load
  • Input under-voltage lockout
  • EU directive 2002/95/EC compliant for RoHS

Let us help with your product selection

New Search by Requirements

Sales Support
☒ Close