AVO75 Series
75 watt Eighth-Brick Isolated DC-DC Converters
The AVO75 series of eighth-brick isolated DC-DC converters comprises six single output models offering fully regulated voltages of 1.2 V, 1.8 V, 2.5 V, 3.3 V, 5.0 V or 12.0 V. These converters can deliver up to 25 amps and up to 75 watts of output power, depending on the particular model. They have a wide 2:1 input range of 36 to 75 Vdc and are designed primarily for use with standard 48 V telecommunications equipment supplies.
AVO75 series converters have a typical efficiency of 91% and accommodate an ambient operating temperature range of -40 to 85˚C. Their open-frame design is optimized for forced air or conduction cooling and an aluminum baseplate option is available for enhanced thermal performance. The conversion technology employs 310 kHz fixed frequency switching to help minimize external EMI filtering requirements.
Standard features include output trim, remote enable, undervoltage lockout and differential remote sense, with non-latching overvoltage and overtemperature protection. AVO75 series converters have an installed height of just 0.34 inch (8.5 mm), making them ideal for systems with demanding inter-board spacing requirements.
- Specifications
- Special Features
- Models - Stock check
-
Total Max Power:
75 W -
Total Max Current:
25 A -
Input Voltage:
36 V to 75 V -
Output Voltage:
1.2 V to 12 V -
Outputs:
Single -
Size (L x W x H):
2.280" x 0.900" x 0.340" -
Warranty:
2 years -
Operating Temperature:
-40°C to +85°C
Electrical Specifications
- Input
- Output
- Logic Control
- Isolation
- Other
- Input voltage: 36VDC to 75VDC
- output voltage : 1.2V to 12V
- Enable: Positive or Negative enable
- insulation: basic insulation
- Isolation: 1500Vdc Isolation
- Mechanical : Open frame or baseplate
- Delivers up to 25A output current
- Basic isolation
- Ultra high efficiency: 92% at 5V full load
- Improved thermal performance:
- full load at 55°C at 1m/s (200LFM) for 5Vo
- High power density
- Low output noise
- CNT function
- Remote sense
- Trim function: +10%/-20%
- RoHS compliant
