LPQ170 Series

85-175 Watt AC-DC Power Supplies

The LPQ170 series of AC-DC power supply series comprises two quad output models. Both models offer +5 V, +12 V and -12 V outputs, plus a floating output which on one model can be adjusted over the range 3.3 V to 25 V, and on the other, 3.3 V to 5.5 V. Both models also provide a regulated 5 V standby output. The LPQ173 is rated at 85 watts with convection cooling and 175 watts with 30 CFM forced air cooling; the LPQ172 is rated at 110 watts with convection cooling and 175 watts with 30 CFM forced air cooling. Measuring just 4.25 x 8.5 x 1.5 inches, the power supplies are ideal for 1U (1.75-inch) rack installations and other low-profile applications.

Datasheet Technical Documentation Print This Page
  • Total Max Power:
    175 W
  • Total Max Current:
    30 A
  • Input Voltage:
    85 V to 264 V
  • Output Voltage:
    -25 V to 25 V
  • Outputs:
    Quad
  • Size (L x W x H):
    4.250" x 8.500" x 1.500"
  • Warranty:
    2 years
  • Operating Temperature:
    0 to +70°C

Electrical Specifications

  • Input
  • Output
  • Logic Control
  • EMI filter: Meets FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted
  • Input range: 85-264 VAC, 120-300 VDC
  • Power factor: 0.99 typical
  • Efficiency: 75% typical at full load
  • Frequency: 47-63 Hz
  • Inrush current: 38 A max, cold start @ 25°C
  • Safety ground leakage current: 1.0 mA @ 50/60 Hz, 264 VAC input
  • Maximum power: 110 W convection (75 W with cover) 175 W with 30 CFM forced air (130 W with cover)
  • Hold-up time: 20 ms @175 W load at nominal line
  • Overload protection: Short circuit protection on all outputs. Case overload protected @ 110-145% above peak rating
  • Standby output: 5 V @ 200 mA regulated ±5%
  • Adjustment range: 3.3 - 5.5V on main; -12 - 15V on 3rd output 3.3 - 25 V on 4th output
  • Overvoltage protection: Tracks outputs 1, 3 & 4; 15 to 35%
  • Remote sense: Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected.
  • Remote inhibit: Requires contact closure to inhibit outputs
  • AC Power failure: TTL logic signal goes high 100 - 500 msec after V1 output; It goes low at least 4 msec before loss of regulation
  • DC Ok: TTL logic signal goes high after main output is in regulation. It goes low when there is a loss of regulation
  • Overvoltage protection
  • IEC EN61000-3-2 compliance
  • DC power good
  • Low output ripple
  • 5 V standby output
  • Active power factor correction
  • Adjustable outputs on 1, 3 & 4
  • Single wire current sharing
  • Built-in EMI filter
  • Power fail and remote inhibit
  • Thermal overload protection
  • Adjustable floating 4th output
  • Remote sense on main output
  • Optional cover (-C suffix)
  • Overload protection

Let us help with your product selection

New Search by Requirements

Sales Support

Data protection – The information you provide on this form will be held on file by Artesyn on a database and will be used for the purposes of promotion of Artesyn products, services and other stories. By submitting this form, you consent to the use of your personal data for these purposes.

We use a tool called Mailchimp to manage our subscriber lists, so when you apply to join, you will receive an email from Mailchimp to confirm that you wish to join the Artesyn mailing list (the email will be from an address such as Artesyn Embedded Power <info@mail1.mcsignup.com>). Please click on the link in the email – this is to help us protect your privacy. You can unsubscribe at any time.

☒ Close