.svg){kind=logo}
artesyn™
ADO500/ADO550 Series
Active
550 W Eighth-Brick DC-DC Converters
An ultra-high full-load efficiency of 96.5% and operating temperature range of -20 to +85˚C ambient make the ADO500 and ADO550 series ideally suited for the isolated converter in distributed power architectures supplying non-isolated converters, such as in 48 V supplies in computing and communications equipment.
The eighth-brick isolated DC-DC converters offer single fully regulated 10 V, 500/550 W output, an input range of 45 to 56 V, and no minimum load. The series offers enhanced pre-bias start-up capability and allows for paralleling two converters with automatic droop method of current sharing. A 185 kHz switching frequency reduces EMI filtering needs.
Open-frame models have an installed height of 0.48 inch (12.2 mm) and baseplate versions 0.57 inch (14.5 mm) to meet your tight inter-board spacing constraints.
The eighth-brick isolated DC-DC converters offer single fully regulated 10 V, 500/550 W output, an input range of 45 to 56 V, and no minimum load. The series offers enhanced pre-bias start-up capability and allows for paralleling two converters with automatic droop method of current sharing. A 185 kHz switching frequency reduces EMI filtering needs.
Open-frame models have an installed height of 0.48 inch (12.2 mm) and baseplate versions 0.57 inch (14.5 mm) to meet your tight inter-board spacing constraints.
Features
- 45 56 Vdc Datacomm input range
- 500/550 W continuous power
- RoHS 6 compliant
- UL94 V0 materials
- Ultra high efficiency > 96.5%
- Input voltage 45-56 VDC
- Output voltage 10.2 VDC
- Output current 50/55 Amps
- mechanical outline standard 1/8 brick
Benefits
- Baseplate optimized for contact cooling or heatsink mounting
- DOSA footprint compliant
- Fixed switching frequency
- High capacitive load capability
- High reliability
- Low ripple and noise
- Open frame version optimized for air cooling
- Prebias startup capability
- Two year warranty (consult factory for extended terms)
- isolation functional insulation
Specifications
| Output Power (W): | 550 |
|---|---|
| Length (Inches): | 2.31 |
| Width (Inches): | 0.91 |
| Height (Inches): | 0.48 |
| Mounting Type: | BMP; Through Hole |
| Minimum Output Current (A): | 0 |
| Maximum Output Current (A): | 55 |
| Output Voltage Range (V): | 9.6V to 11.2V |
Technical Documentation
24/5 Support Available
Get Expert Advice From Our Engineers
We are committed to providing excellent customer service and technical support to our customers. With live chat and phone support, you can reach out to a qualified engineer for help at any time.
Get Support Now