.svg){kind=logo}
artesyn™
LPT100-M
Active
80 to 130 W AC-DC Medical Power Supplies
The LPT100-M series of triple output open-frame AC-DC power supplies features ITE and medical safety approvals. There is a choice of four models, covering output voltages from 3.3 V to 24 V. The power supplies have a typical full load power conversion efficiency of 82% and with a height of only 1.28 inches offer a power density in excess of 12 W per cubic inch. LPT100-M power supplies are primarily designed for use in information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications.
Features
- Frequency 47 - 63 Hz
- Inrush current 50 A max., cold start @ 25°C
- Efficiency 82% typical at full load
- Input range 90 - 264 VAC, 120 - 300 VDC
- Safety ground leakage current 275 uA @ 50/60 Hz, 264 VAC input
- Adjustment range All outputs -40% to +10% except for 24 V
- Hold-up time 10 ms @ 130 W load, 120 VAC input
- Remote Sense Compensates for 0.5 V lead drop on main output
Benefits
- Power fail Active low TTL logic signal
- Overload protection Short circuit and case overload protected
Specifications
| Output Power (W): | 130 |
|---|---|
| Length (Inches): | 4 |
| Width (Inches): | 2 |
| Height (Inches): | 1.28 |
| Mounting Type: | Embedded PSU |
| Minimum Output Current (A): | 0 |
| Maximum Output Current (A): | 18 |
| Output Voltage Range (V): | -12V to 28.8V |
Technical Documentation
24/5 Support Available
Get Expert Advice From Our Engineers
We are committed to providing excellent customer service and technical support to our customers. With live chat and phone support, you can reach out to a qualified engineer for help at any time.
Get Support Now